Motorcycle Repair & Service in Joplin, MO

H-D® Express Lane  Service

• Engine oil and filter change*

• Brake system flush

• Tire replacements

• Brake pad replacements

• Hand grips (non-heated)

• Foot pegs

• Mirrors (non-lighted)

• Critical fluids exchange*

• Slip-on exhaust

• Battery replacement

• Tuner installation (with download)

• 4-point docking hardware

• Rider's backrest (standard)

• Detachable Tourpak (non-lighted)
  *not a replacement for regularly scheduled maintenance.

Our Full 24-Point Inspection

1. Replace engine oil, filter, and drain plug O-ring. Torque drain plug to proper specification. Ensure proper oil level at operating temperature. Replace engine oil, filter, and drain plug O-ring. Torque drain plug to proper specification. Ensure proper oil level at operating temperature.
2. Check the operation of all electrical equipment, lighting, and controls.
3. Inspect front and rear tire tread depth and air pressure. Check the tightness of all spokes (if equipped) reservoirs.
4. Inspect the fluid level of the front brake and clutch, check the torque of cover screws
5. Check the torque of switch housing screws, clutch lever handlebar clamp screws, and master cylinder handlebar screws
6. Check engine coolant freeze point and inspect for leaks. Clean radiators.
7. Drain and replace primary chaincase lubricant and drain plug O-ring.
8. Drain and replace transmission lubricant and drain plug O-ring
9. Check the torque of the right front engine mount end cap screws and engine mount to front crankcase screws.
10. Inspect oil, brake, and fuel lines and fittings for leaks, contact, or abrasions.
11. Inspect the rear brake reservoir for proper level. Check the torque of the cover screws.
12. Inspect front brake pads and discs. Ensure pad thickness is within specification.
13. Inspect rear brake pads and disc. Ensure pad thickness is within specification.
14. Check the torque of the front and rear axle nuts.
15. Inspect and lubricate the jiffy stand.
16. Lubricate clutch cable. Ensure proper cable adjustment and hand lever free play.
17. Check, adjust, and lubricate brake and clutch controls.
18. Inspect and adjust the drive belt. Inspect the wheel sprocket.
19. Check rear air suspension pressure, operation, and leakage.
20. Inspect the exhaust system for leaks, cracks, and loose or missing fasteners or exhaust shields.
21. Check battery. Clean connections and torque terminal screws.
22. Lubricate the fuel door, hinge, and latch.
23. Check for open recalls, product campaigns, trouble codes, and engine management system updates.
24. Road test -- verify component and system functions.